User manual

NHP5010 User Manual

 Web Idle Time Out Settings

Web idle timeout setting is used to set the time for system automatically exiting the

Web configuration page. The range is 5~30 minutes.

 Services

If you have established some WAN connections, you may enable or disable the

service types of the selected WAN connections. You can also enable or disable

the service types of remote hosts. For example, enable the Telnet service, and

then the remote host can log in to the PLC wireless router by the Telnet service.

After setting the parameters, click Apply to save the settings.

5.4.2 Backup and Restoration

Choose MAINTENANCE > Backup and Restore, and the following page appears.

In this page, you can reboot the router, backup the configuration file, and restore

the factory default settings of the router.

 Reboot

Click Reboot to reboot the router.