User manual

NHP5010 User Manual
92
In this page, you can modify the password for logging in to the PLC wireless router,
set Web idle timeout, and enable or disable the WAN connection service.
 Account Password
In order to ensure the network security, it is recommended you change the default
login password. Please remember the new password if you change the default
password. You may write it down and keep it well for future use. If you forget the
login password, you need to restore the factory default settings of the PLC
wireless router. After the default settings are restored, the PLC router will lose the
new settings that you configure.
 Note:
For the sake of network security, it is strongly recommended to change the
password of admin. If you forget the login password, please restore the factory
default settings of the PLC wireless router. The default user name and
password of the super user are admin.