User manual

NHP5010 User Manual
90
 Remote Device Configuration
The Remote Device Configuration allows you to view the configuration
information of the remote PLC devices and to set the network passwords of the
remote devices.
You can search current remote PLC devices by clicking the Scan button.
Select Enable from the drop-down list of Change Remote NetworkPwd to
display the following page.
You can set the passwords of remote PLC devices according to their MAC
addresses and DEKs (Device Equipment Key).
The following table describes parameters in this page:
Field
Description
Device Name
Enter the device names of the remote devices.
Remote MAC
Enter the MAC addresses of the remote devices.
Password (DEK)
When you set the parameters of the remote devices, you
need to enter this password for authentication.
Remote
NetworkPwd
Set the network passwords for the remote PLC devices.
 Note:
You can set up to 8 network passwords for the remote PLC devices.