User manual

NHP5010 User Manual
82
The following table describes parameters in this page:
Field
Description
Enabled
Enable or disable RIP.
Interface
Display the WAN connection name.
Version
You can select RIPV1, RIPV2 or Both. Both indicates that it
is compatible with RIPV1 and RIPV2.
Status
Display whether the specified RIP is valid or not.
After setting the parameters, click Apply to save the settings.
5.3.4.6 UPnP
By using the Universal Plug and Play (UPnP) protocol, a host on the LAN side can
require the router to realize the conversion of specific port, so that an external host
can access resources on the internal host when necessary. For example, if MSN
Messenger is installed on Windows ME and Windows XP operating systems,
UPnP can be used for audio and video conversations. In this way, functions
restricted by NAT can work properly.
Choose Advanced Network > UPnP on the left pane or click UPnP in the
ADVANCED NETWORK page to display the following page.
In this page, you can enable the UPnP function and select a WAN connection.
After setting the parameters, click Apply to save the settings.