User manual

NHP5010 User Manual

The following table describes parameters in this page:

Field

Description

Destination

Network Address

Set the IP address of destination network.

Subnet Mask

Set the subnet mask of the destination IP address.

Use Gateway IP

Address

Set the IP address of host or router that data packets are

sent to.

Forwarding

Metric

Set the number of forwarding hops that network data

packets are forwarded by the router.

Use Interface

Select a local legal interface for the routing rule.

After setting the parameters, click Apply to save the settings.

5.3.4.5 RIP

RIP (Routing Information Protocol) can be used to determine the optimal path by

estimating the hops of distance or the number of routing router.

Choose Advanced Network > RIP on the left pane or click RIP in the

ADVANCED NETWORK page to display the following page.

In this page, you can configure the RIP parameters.