User manual

NHP5010 User Manual
64
The following table describes parameters in this page:
Field
Description
IP
Enter the computer IP address that needs to be
filtered.
TCP/UDP
You can select TCP, UDP, or Both.
Remark
Enter the comment about the IP filtering rule.
After setting the parameters, click Apply to save the settings.
5.3.2.4 Port Filtering
The port filtering function allows you to control all data transmitted through the
PLC wireless router. If a PC’s port is in the specified range of port filtering, data
from this port cannot be transmitted.
Choose Access Control > Port Filtering on the left pane or click Port Filtering
in the ACCESS CONTROL page to display the following page.
Check Enable Port Filtering, and the following page appears.