User manual

NHP5010 User Manual

The following table describes parameters related to the WEP mode:

Field

Description

WEP Key Length

Select the encryption length of WEP key. You can select 64

bit or 128 bit.

Default Tx Key

Select one from the four keys as the default key of the

wireless network.

WEP Key

Format

 When the key format is 64 bit, you need to enter 5

ASCII characters or 10 hexadecimal digits.

 When the key format is 128 bit, you need to enter 13

ASCII characters or 26 hexadecimal digits.

WEP Key 1/2/3/4

Set 64-bit or 128-bit key according to the key format.

Authentication

Select the proper authentication mode. You can select Open

or Share Key.