User manual

NHP5010 User Manual
iv
Features
PLC Features
 Power voltage range is 100 to 240 V AC 50/60Hz.
 Support the HomePlug AV protocol and the IEEE1901 protocol.
 PLC physical link rate is up to 500Mbps.
 Support the following modulation schemes: OFDM QAM
4096/1024/256/64/16/8, QPSK, BPSK, and ROBO.
 Support 128-bit AES link encryption and user NMK authentication, for
providing secure power line communication.
 Support windowed OFDM with noise mitigation based on patented line
synchronization technique, for improving data integrity in noisy conditions.
 Support channel self-adaptation and channel estimation for maximizing
real-time throughput.
 Support priority-based CSMA/CA channel access scheme for maximizing
efficiency and throughput.
 Support four-level QoS.
 Support ToS and CoS packet classifications.
 Support IGMP multicast management session.
Wireless Features
 Support IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3, IEEE802.3u,
IEEE802.11i and IEEE802.11e.
 Support 2T2R mode. Transmission data rate is up to 300Mbps.
 Support WEP and WPA for secure data transmission.
 Support DHCP server.
 Support version upgrade through Web page.
 Support restoring factory default settings.
 Support the following wireless security modes: WEP, WPA-PSK, WPA2-
PSK, and WPA/WPA2-PSK
 Support system status display.
 Support system log.