User manual

NHP5010 User Manual
41
The following table describes parameters in this page:
Field
Description
Enable WAN
Enable or disable the WAN connection of bridge type.
Connection Type
Select Bridge from the drop-down list.
Service Type
You can only select INTERNET.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 WLAN ports, which can
be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
After setting the parameters, click Apply to save the settings.
5.2.3 Wireless Setup
Choose SETUP > Wireless Setup, and the following page appears.