User manual

NHP5010 User Manual
40
Field
Description
PPPoE Account
Enter the user name provided by the ISP for PPPoE dialup.
PPPoE Password
Enter the password provided by the ISP for PPPoE dialup.
Confirm Password
Enter the PPPoE password again.
Authentication
Method
You can select AUTO, PAP, CHAP, MS-CHAP, or EAP
from the drop-down list.
MTU
Set the maximum transmission unit. It is 1500 bytes for
most Ethernet networks, 1492 bytes for PPPoE connection.
But some ISPs may require smaller MTUs. Do not modify
the value of MTU size unless it is necessary for your ISP
connection.
Domain Name
Server Assignment
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to
your router.
Domain Name
Server (Primary) IP
Enter the IP address of the primary DNS server. Domain
names should be resolved first by the primary DNS server.
Domain Name
Server (Secondary)
IP
If the ISP provides another DNS server, enter the IP
address of the DNS server. If the primary DNS server fails
to resolve the domain name server, the secondary will
resolve it.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 wireless WLAN ports,
which can be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
(4) Bridge
In the Bridge mode, all physical ports and wireless interfaces co-exist in the
virtual interfaces.