User manual

NHP5010 User Manual
38
Field
Description
IP address
Enter the WAN IP address provided by the ISP. It cannot be
null.
Subnet mask
Enter the WAN subnet mask provided by the ISP. It varies
depending on the network type. Usually, the subnet mask is
255.255.255.0 (Class C).
Default Gateway IP
Enter the IP address of the gateway provided by the ISP.
This IP address is used for connecting to the ISP.
MTU
Set the maximum transmission unit. It is 1500 bytes for
most Ethernet networks. But some ISPs may require
smaller MTUs. Do not modify the value of MTU size unless
it is necessary for your ISP connection.
Domain Name
Server Assignment
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to
your router.
Domain Name
Server (Primary) IP
Enter the IP address of the primary DNS server. Domain
names should be resolved first by the primary DNS server.
Domain Name
Server (Secondary )
IP
If the ISP provides another DNS server, enter the IP
address of the DNS server. If the primary DNS server fails
to resolve the domain name, the secondary will resolve it.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 WLAN ports, which can
be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
(3) PPPoE
If the ISP provides the user name and password for PPPoE dialup, please select
PPPoE.