User manual

NHP5010 User Manual
36
Field
Description
Vendor Class ID
Enter the vendor class ID. DHCP server assigns the IP
address to your router according to the vendor class ID.
MTU
Set the maximum transmission unit. It is 1500 bytes for
most Ethernet networks. But some ISPs may require
smaller MTUs. Do not modify the value of MTU size unless
it is necessary for your ISP connection.
Domain Name
Server Assignment
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to
your router.
Domain Name
Server (Primary) IP
Enter the IP address of the primary DNS server. Domain
names should be resolved first by the primary DNS server.
Domain Name
Server (Secondary)
IP
If the ISP provides another DNS server, enter the IP
address of the DNS server. If the primary DNS server fails
to resolve the domain name, the secondary will resolve it.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 WLAN ports, which can
be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
(2) Static IP
If the ISP provides the information of the IP address, subnet mask, gateway, and
DNS server, please select Static IP. For detailed settings, refer to your ISP.