User manual

NHP5010 User Manual
26
Step 8 In this page, you can configure the wireless parameters of the PLC
wireless router.
The following table describes parameters in this page:
Field
Description
Enable Wireless
Interface
Enable or disable the wireless interface.
Wireless Network
Name (SSID)
The wireless network name (SSID) can contain up to 32
characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive.
Visibility Status
 If Visible is selected, the PLC wireless router
broadcasts its SSID on the wireless network.
 If Invisible is selected, the PLC wireless router does not
broadcast its SSID on the wireless network.
Country
Select the country where you are from the drop-down list.
802.11 Mode
 Select the appropriate wireless mode. The default is
Mixed 802.11b/g/n.
 802.11b only: The maximum rate is 11Mbps.
 802.11g only: The maximum rate is 54Mbps.
 802.11n only: For 20M bandwidth, the maximum rate is
130Mbps (150Mbps for short preamble); for 40M Upper
(+) or 40M Lower (-) bandwidth, the maximum rate is
270Mbps (300Mbps for short preamble).