User manual

NHP5010 User Manual
25
The following table describes parameters in this page:
Field
Description
Enable WAN
Enable or disable the WAN connection of bridge type.
Connection Type
Select Bridge from the drop-down list.
Service Type
You can only select INTERNET.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 WLAN ports, which can
be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
Step 7 After selecting the proper Internet connection type and setting the
relevant parameters, click Next to display the following page.