User manual

NHP5010 User Manual
24
Field
Description
PPPoE Account
Enter the user name provided by the ISP for PPPoE dialup.
PPPoE Password
Enter the password provided by the ISP for PPPoE dialup.
Confirm Password
Enter the PPPoE password again.
Authentication
Method
You can select AUTO, PAP, CHAP, MS-CHAP, or EAP from
the drop-down list.
MTU
Set the maximum transmission unit. It is 1500 bytes for most
Ethernet networks, 1492 bytes for PPPoE connection. But
some ISPs may require smaller MTUs. Do not modify the
value of MTU size unless it is necessary for your ISP
connection.
Assignment
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to
your router.
DNS (Primary) IP
Enter the IP address of the primary DNS server. Domain
names should be resolved first by the primary DNS server.
DNS (Secondary)
IP
If the ISP provides another DNS server, enter the IP address
of the DNS server. If the primary DNS server fails to resolve
the domain name server, the secondary will resolve it.
LAN Port
The PLC wireless router supports 2 LAN ports, which can
be bound to different interfaces.
WLAN Port
The PLC wireless router supports 4 WLAN ports, which can
be bound to different interfaces.
Enable VLAN
Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.
(4) Bridge
In the Bridge mode, all physical ports and wireless interfaces co-exist in the
virtual interfaces.