User manual

NHP5010 User Manual

Step 5 In this page, you can set the Network Time Protocol (NTP) server

according to your time zone. After setting the NTP server and time zone,

click Next to display the following page:

Step 6 The PLC wireless router supports 4 types of Internet connection: DHCP,

Static IP, PPPoE, and Bridge. In this page, you can select the proper

Internet connection mode and configure the relevant parameters

according to the actual requirements. If you are not sure of your Internet

connection mode, please contact your ISP.

(1) DHCP

If you select DHCP, the PLC wireless router automatically obtains the IP address,

subnet mask and IP address of the gateway from the ISP. If your ISP does not

provide IP network parameters, please select this mode. See the following figure: