User manual

NHP5010 User Manual

3.3.2 Before You Begin

Before you install the device, please pay attention to the following items:

 When the device is connected to a computer, hub, router, or switch, the Ethernet

cable should be shorter than 100 meters.

 Place this device on a stable surface or support. Do not put this device on the

ground.

 Keep the device clean. Keep away the device from direct sunshine. Avoid any

metal in the device.

 Place the device in the center of the placement area, and try to optimize the

wireless coverage.

3.3.3 Connecting the Device

To connect the device, do as follows:

Step 1 Connect one end of the RJ45 cable to the LAN interface of the PLC

wireless router.

Step 2 Connect the other end of the RJ45 cable to your PC.

Step 3 Insert the power plug of the device into the wall socket directly.