User manual

NHP5010 User Manual
114
6.2 Joining an AVLN Network
Assume that a network exists, a new device, the ‘joiner’, wants to join the network.
Any device on the existing network can become the ‘adder’.
Step1 Press the Security pushbutton on the ‘joiner’ for at least 10 seconds. The
device will reset and restart with a random NMK.
Step2 Press the Security pushbutton on the ‘joiner’ for less than 3 seconds.
Step3 Press the Security pushbutton on any network device for less than 3
seconds, making it the ‘adder’. Please press this pushbutton within 1
minute.
Step4 Wait for the connection to complete.
The Power LED indicators on both devices will flash at 1-second interval until the
process succeeds or fails. If the connection is successful, the Power and Data LED
indicators on both devices illuminate steadily. If the connection is failed, the Power
LED indicators on both devices still illuminate steadily, but the Data LED indicators
on both devices go out. In that case please repeat Step1 to Step4.