User manual

NHP5010 User Manual
108
After finishing the settings, click the Test button, and then the result of ping
diagnosis is displayed in the page. Click Stop button to stop ping diagnosis.
5.4.6.2 Traceroute Diagnosis
Traceroute diagnosis is used to find out which path a packet takes to reach its
destination. It is a nice way to see which router it passes and which network it
crosses to reach its destination.
Choose Diagnostics > Traceroute on the left pane or click Traceroute in the
DIAGNOSTICS page to display the following page.
In this page, you can set the parameters of Traceroute diagnosis.
The following table describes parameters in this page:
Field
Description
Host
Enter the IP address of host that performs the operation of
tracing routing.
Max TTL
Set the maximum TTL (Time to Live). You can estimate
the number of routers that data packet passes from the
source host to the destination host according to the TTL
value.
Wait times
Enter the waiting time.