User manual

NHP5010 User Manual
107
5.4.6.1 Ping Diagnosis
The ping diagnosis allows you to test a connection between 2 hosts in the same
network or in different networks in simple ways. If the command ping is successful,
it means that there is a correct physical as well as a logical connection between 2
hosts on any network. (Unless if there is a firewall interfering somewhere in
between.)
Choose Diagnostics > Ping on the left pane or click Ping in the DIAGNOSTICS
page to display the following page.
In this page, you can set the parameters of Ping diagnosis.
The following table describes parameters in this page:
Field
Description
Ping Host
Enter the IP address of the host that connects to the LAN
interface of the PLC wireless router.
Number of Ping
Set the number of ping packet.
Ping Packet Size
Set the length of the ping packet.
WAN Connection
Select a WAN interface for ping diagnosis.