User manual

NHP5010 User Manual
105
5.4.5 Log Settings
Choose MAINTENANCE > Log Settings, and the following page appears.
In this page, you can enable or disable the log function. After enabling the log
function, you can set 3 types of system log modes. The log modes contain Local,
Remote, and Both.
 When you select Local, the events are recorded in the local memory.
 When you select Remote, the events are sent to the remote system log
server with specified IP address and UDP port.
 When you select Both, the events are recorded in the local memory or sent
to the remote system log server with specified IP address and UDP port.
Click the View System Log button to display the following page.