User manual

NHP5010 User Manual
6
3.2 Interface and Switch Description
The following table describes interfaces and switch on the PLC wireless router:
Interface
Description
LAN1
RJ45 LAN interface, for connecting a hub, switch, or
computer on a LAN.
LAN2/WAN
RJ45 LAN interface, for connecting a hub, switch, or
computer on a LAN.
OFF ON
Turn on or turn off the device.
3.3 Hardware Installation
3.3.1 System Requirements
Before installing the device, please ensure that the following items are ready:
 At least one Ethernet RJ45 cable (10Base-T/100Base-T)
 One NHP5010 PLC wireless router
 One PLC device for PLC communication
 A PC that is installed with the TCP/IP protocol and can access the Internet.