User manual

NHP5010 User Manual
100
Caution:
To avoid losing previous configuration of the router, save the
configuration before upgrade.
During upgrade, do not power off the PLC wireless router or press the
Reset pushbutton.
The default upgrade mode is Local, and it supports only the firmware with
the format ‘.img’.
5.4.4 Configuration Update
Choose MAINTENANCE > Configuration Update, and the following page
appears.
In this page, you can update the configuration file of the PLC wireless router. You
may obtain the configuration file from the local server or remote server.
 Local Upgrade Mode
Usually, you can upgrade configuration file from the local server.
If you select LOCAL from the drop-down list of upgrade mode, the following page
appears.