User manual

NHP5010 User Manual
99
The following table describes parameters in this page:
Field
Description
Firmware Version
Display current firmware version.
Upgrade Mode
Select HTTPS.
Server IP Address
Enter the IP address of HTTPS server.
Server Port
Enter the port number of HTTPS server.
User Name
Enter the username for connecting to the HTTPS
server.
Password
Enter the password for connecting to the HTTPS
server.
Directory
Enter the firmware directory.
Clear Config
If you check Clear Config, the PLC router restores to
the default settings after upgrade. Otherwise, the PLC
router keeps the current settings.
Click Apply, and then system begins to upgrade firmware.
After upgrade completes, the PLC wireless router automatically reboots.