User manual
NHP5010 User Manual
5
The following table describes pushbuttons on the front panel:
Button
Description
Security
It is used to set the status of the device members.
Press and hold the Security pushbutton for more than 10
seconds to exit the current network and generate a random
password of network member.
Press and hold the Security pushbutton for less than 3
seconds, and then the PLC wireless router becomes a
member of the existing AVLN.
Reset
Press the Reset pushbutton for more than 3 seconds and then
release it. System restores the factory default settings.
WPS
It has the following functions:
Press the WPS pushbutton for less than 3 seconds to enable
the negotiation of PBC mode.
Press the WPS pushbutton for more than 5 seconds to
enable or disable WLAN.