Install guide

For any further information on ADDON product, please visit our website: http://www.addon-tech.com

7) The device will reboot and you will probably be disconnected.

8) After 60 seconds you can actually plug the second NHP5010 and connect to it.

9) Open the management page for the second NHP5010, change the SSID and

select PLC Powerline and click Apply (go back to point 4,5 and 6)

10) Repeat these steps for any NHP5010 Wireless Powerline Adapter that you have

at home.

11) IMPORTANT: Go back to Internet Protocol Version 4 (TCP/IPv4) Properties

(check

b) Login to the management page

from point 1. To point 6.) and

select Obtain an IP address automatically and Use DNS server address

automatically and then click OK.