Install guide

For any further information on ADDON product, please visit our website: http://www.addon-tech.com 27
k) Add a NHP5010 Powerline Wireless Adapter
If you want to add a second, a third or a fourth NHP5010 Wireless Powerline to your
existing network, you can do it by following these steps:
1) Remove all the NHP5010 from your network
2) Plug the first NHP5010 into the power socket and connect your PC / Laptop to it
(Page 2 to Page 4)
3) Login to the management page (Page 5 to Page 9)
4) Change the Wireless Network Name SSID from the default (ADDON-NHP5010)
and choose a different SSID for any NHP5010 in your network. For example, you
can set the SSID “Kitchen” for the NHP5010 plugged in the kitchen,
“Livingroom” for the NHP5010 plugged in the living room, and so on.
5) After you change the SSID, you will probably be disconnected. Just reconnect to
the wireless connection with the new SSID and open again the management
page.
6) Click to ADVANCED -> PLC Setting -> PLC Powerline -> Apply