Install guide

For any further information on ADDON product, please visit our website: http://www.addon-tech.com 2
a) Create your Powerline Network step by step
Figure 1 Hardware Connection
To establish Home Network with ADDON NHP5010, it needs one NHP5010 and one
HP5100S. One is connected to computer and the other one is connected the router, as
shown in Figure 1
1. Connect the HP5100 to your router
- Plug Ethernet cable into the Ethernet port of HP5100.
- Make sure your ADSL/Cable/DSL modem router is working correctly and plug the other
end of the cable into the Ethernet port of the router.
- Plug HP5100 into your home wall outlet.
2. Connect the NHP5010 to your computer/device by Ethernet Cable or by
Wireless (Page 3)
How to connect the NHP5010 by Ethernet Cable:
- Plug Ethernet cable into the Ethernet port of NHP5010.
- Plug the other end of the cable into the Ethernet port of the computer.
- Plug NHP5010 into your home wall outlet.