User manual

ADDON HP2100 User Manual
4
3 Getting to Know the Adapter
3.1 The Ethernet Interface
Ethernet: Ethernet port. Connect one end of an Ethernet network cable to PLC’s
Ethernet port and the other end to your computer or other Ethernet-enabled
network device.
3.2 The Adapter's Buttons
Figure 2 Side panel of the device
Security\Reset: Set the status of the device members or restore the factory default
settings.
Pressing and holding the Security\Reset button for less than 3 seconds
makes the adapter a member of the existing AVLN. Pressing and holding the
Button for between 5 and 8 seconds makes the adapter getting a random
NMK. Pressing and holding the Button for between 10 seconds and 15
seconds makes the adapter restore the factory default settings. For more
details, see chapter 5 .