User manual

ADDON HP2100 User Manual
13
Scan
This button is used to perform an immediate search for HomePlugAV devices
connected to the powerline network. By default, the utility automatically scans
every a few seconds and updates the displayed information.
4.2 Privacy Tab
In the Privacy screen, you can maintain security for the logical network and select
the device included in the network. See
Figure 7.
Figure 7 Privacy tab
All HomePlugAV devices are loaded using a default logical network (network
name), which is normally “HomePlugAV”. In the Privacy screen, you can modify
a private network by changing the network names.
You can always reset to the HomePlugAV network (Public) by entering
“HomePlugAV” as the network name or by clicking on the Use Default button.
Note:
If the network name changes to anything other than HomePlugAV, the network
type in the main screen is displayed as Private.