User manual

ADDON HP2100 User Manual
11
The lower panel displays all the HomePlugAV remote devices, which are
discovered in the current logical network. The total number of remote devices
connected in the same network is displayed above the remote device panel.
Network type (Public or Private) depends on the network status of the local
device. Autoscan shows whether the autoscan function is on. The following
information is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To change
the name, click Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it. The
steps for setting the password of the device (required when creating a private
network) are as follows:
Step 1 Click the device name to select the device in the lower panel.
Step 2 Click Enter Password. A dialog box appears, showing the device name
and password. See
Figure 5.
Figure 5 Set the device password