User`s manual

80
continue. When it completes, return to the "Advanced\RadioOff" folder, then double-
click on the "RadioOff_2.bat" file, and follow its on-screen instructions precisely. At
one point, you will need to connect to your InternetVue receiver. Click on "SELECT TV"
and the following window will appear:
Because you will need to connect using the IP address, click on the "Connect via
Direct Connect ID" radio button, then enter the IP address in the space
provided. Then, click on CONNECT, and it should prompt you about upgrading the
firmware. Go ahead and click on YES. Follow the remaining instructions in the black
command line window.
With a disabled WiFi radio, the only way to connect to the InternetVue is by wired
Ethernet. The Direct method, which uses the wireless networking of the InternetVue,
will not be available.
Turning On the WiFi Radio
Turning On the WiFi RadioTurning On the WiFi Radio
Turning On the WiFi Radio
Turning on the WiFi radio uses the same process as above, except that the folder
where the files are located is "Advanced\RadioOn".