User`s manual

77
one point, you will need to connect to your InternetVue receiver. Click on "SELECT TV"
and the following window will appear:
Because you will need to connect using the IP address, click on the "Connect via
Direct Connect ID" radio button, then enter the IP address in the space
provided. Then, click on CONNECT, and it should prompt you about upgrading the
firmware. Go ahead and click on YES. Follow the remaining instructions in the black
command line window.
When the SSID is hidden, that does NOT turn off the wireless radio of the InternetVue,
it just becomes invisible to many wireless networking utilities. With a hidden SSID,
the only way to connect to it is by wired Ethernet. The Direct method, which uses the
wireless networking of the InternetVue, will not be available.