User`s manual

PAL / NTSC Conversion

pwd >pal <press ENTER. InternetVue will reboot itself>

Converting from PAL to NTSC

Converting from PAL to NTSCConverting from PAL to NTSC

Converting from PAL to NTSC

The procedure will be the same as whichever configuration suits you above, except

the final command is changed:

telnet [IP address] <press ENTER, the window will change>

cd /etc <press ENTER>

rm pal <press ENTER. InternetVue will reboot itself>

Please note that the PAL conversion is persistent even after the InternetVue is power-

cycled, or a factory reset is performed. The only way to resume NTSC output is to execute

the Telnet commands as shown above.