User`s manual

4
Hardware Specifications
Hardware SpecificationsHardware Specifications
Hardware Specifications
The InternetVue PC2TV receiver comes in two versions, the IV-2020, which is best for home users,
and the EV-2100, more suited for office and educational use. Both models utilize the PC2TV
software, which uses proprietary method of capturing audio and video from your PC, then sending it
over the network to the units. Because this capture / decode process is unique to the InternetVue
products, there is no standard which hackers can use to decipher "eavesdropped" AV data. This
provides a solid layer of security for your audio/video stream.
InternetVue 2020
InternetVue 2020 InternetVue 2020
InternetVue 2020 InternetVue 2100
InternetVue 2100InternetVue 2100
InternetVue 2100
Model Number IV-2020 EV-2100
Product Image
(color of enclosure may vary)
Video Output Formats
Analog Component Video (Y-Pb-Pr)
NTSC/PAL Composite Video (CVBS)
Analog RGBHV (VGA)
DVI-D single-link
Video Output Connectors
3x RCA jacks, red, green, blue
1x RCA jack, yellow
HDB15 female (VGA)
DVI-D 24-pin female
Video Output Resolution
720p (Photo Mode)
480p (Video Mode, 30fps)
480i only when using CVBS output
1024x768 (Photo Mode)
640x480 (Video Mode, 30fps)
Video Color Depth 24 bits
Audio Output Format Analog stereo
Audio Output Connector 3.5mm stereo jack
Factory Reset Button Location Rear Front
Remote Control Receiver IR port in front window none
Wired Networking Standard IEEE 802.3 Ethernet
Wired Networking Connector RJ45 8-pin jack
Wireless Networking Standards IEEE 802.11b (11 Mbps) and 802.11g (54 Mbps)
Antenna Connector Reverse SMA
Wireless Frequency Band 2.4GHz ISM
Wireless Network Authentication WEP, WPA, and WPA2 using up to 23-character passphrase
Wireless Data Encryption TKIP and AES
Industry Certifications RoHS, CE, FCC Part 15 Class B, UL, cUL
Power Requirements 5 VDC, 2 A