User`s manual

Advanced Tricks

Advanced TricksAdvanced Tricks

Advanced Tricks

Using One PC to Display the Same Content on

Using One PC to Display the Same Content onUsing One PC to Display the Same Content on

Using One PC to Display the Same Content on Two InternetVue Receivers

Two InternetVue Receivers Two InternetVue Receivers

Two InternetVue Receivers

Currently, the InternetVue solution is one-to-one. However, there is a way to have one physical PC

send the same video stream to two InternetVue receivers.

NOTE: This will only work on powerful machines, preferably dual or quad-core systems with

Hardware Virtualization capabilities in its CPU.

1. Make sure that the InternetVue unit have been assigned IP addresses from your

router/DHCP server. The IP address will be shown on the TV upon start-up of the

InternetVue.

•

If the InternetVue is connected to your router with an ethernet cable, it will automatically get

an IP address within a minute or so.

•

If an IP address does not appear on the TV, power-cycle the InternetVue.

•

If it still does not get an IP address, make sure the DHCP server is enabled in your router,

and try power-cycling the router as well.

•

If the InternetVue receiver is operating wirelessly, you will need to connect to it first using the

Direct method, and select which wireless router to connect to, and provide that router's

WEP/WPA/WPA2 passphrase if necessary.

2. Download and install Microsoft Virtual PC 2007 from Microsoft's website (free of charge).