User`s manual

10
Booting Up the InternetVue and
Booting Up the InternetVue and Booting Up the InternetVue and
Booting Up the InternetVue and Running the
Running the Running the
Running the
PC2TV Software
PC2TV SoftwarePC2TV Software
PC2TV Software
Whenever you power up the InternetVue receiver, it goes through a 30 to 45-second bootup
process. On an IV-2020, it automatically detects which video output connector is being used. As
for the EV-2100, both outputs are enabled simultaneously.
During the bootup process, a set of test screens appear. With an IV-2020, these images can help
you determine if your Component Video cables are connected properly. The test screens loop in the
following order:
When fully initialized, your TV will then display the InternetVue "splash screen":
This splash screen will provide you with useful information when connecting either Directly or
through the Network.
• Wireless SSID
Wireless SSIDWireless SSID
Wireless SSID of your InternetVue receiver
• Wired Network IP Address
Wired Network IP AddressWired Network IP Address
Wired Network IP Address of your InternetVue receiver, if connected
• Wireless Network IP Address
Wireless Network IP AddressWireless Network IP Address
Wireless Network IP Address of your InternetVue receiver, if configured
• Security Access Code
Security Access CodeSecurity Access Code
Security Access Code, if enabled