User Manual

 
 ________________________________________________________________________________________________________________
77
11.5 HART Setup
Whenthe measurement is active in HART communication mode, pressSetupto show the HART setup interface.The
calibratorprovidesfivesetupfunctions(refertotable11‐1).
Table11‐1
Setup Variables Attributes Description
Basic
DeviceLabel Revisable
English input is available, no more than 8
characters
Primaryvariablerangeunits Revisable
Can be changed into any units supported by
transmitter
Primaryvariablerangelower
limit
Revisable
The setting range cannot be less than
transmitterrangelowerlimit
Primary variable range
upperlimit
Revisable
Thesettingrangecannotexceedthetransmitter
rangeupperlimit
Dampingtime Revisable
Floattype，thevaluecannotbelessthan0
Transferfunction Revisable
Can be changed into linear transfer or rooting
transfer
Sensor
SensorS/N Unchangeable N/A
Sensorrangelowerlimit Unchangeable N/A
Sensorrangeupperlimit Unchangeable N/A
Sensorminimumspan Unchangeable N/A