User Manual

 
 ________________________________________________________________________________________________________________
63

Figure10.8AsCalCalibrationMode
TheCalibrationModepagewillappeariftheUUTisindicatororrecorder
(asshowninFigure10.8).
About Reverse Calibration
AdjusttheoutputsignalofthecalibratoruntilthereadingoftheUUT
displaysanominalsetpoint,thenrecordthereadingfromthecalibrator.
Thecalibra torwillcalculatetheUUT'stheoreticalreading
accordingly.
Inmostcases,thereversecalibrationisaverypracticalmethod,which
eliminatesthetroubleofmanualrecording.
Pressureindictors/recordersarealsosuitableforreversecalibration.You
canapplyapressuretoreadthepressuregaugethenrecordthereading
fromthepressuremodule(calibrator).
About Forward Calibration
Theforwardcalibrationis
traditional,simplewa ystocalibra t e.(Tomake
thecalibratoroutputanominalsetpointsignals,andthenrecordthe
UUT'sactualreadings.)