User Manual

 
 ________________________________________________________________________________________________________________
46
value, sourcingvalue,referencejunction compensationtemperature (for thermocouples), and loop powerstatus and
systemtime.
ToentertheSnapshotListintheSnapshotManagementpage,pressEnterorSelect,andallsnapshotsinthecalibrat or’s
memorywillbepresentedintheSnapshotList.Youcanrecallthesnapshotbyitsname
orindex.
Thecalibratorcanstore100snapshotfiles.Ifthereisnotenoughmemoryspace,youmusteraseprevioussnapshots.
Note:YoucaneraseallsnapshotsontheSnapshotManagementpage.
9.3 Date and Time
To changethedateand timeofthecalibrator,selectDateTimeontheSetuppageandpressEnter
orSelectYoucan
adjustthedateandtimeseparately.
Inaddition,youcansetthedateformatandseparator.IntheDateFormatpage,adropdownlistofavailabledatewill
appear:yyyymmdd,mmddyyyyandddmmyyyy.Thedefaultformatisyyyymmdd.Youalso
canchoosethesepara tor
fromtheseparatorlist.
9.4 Utilities
9.4.1 Scientific Calculator
Thecalculatorisusedtoperformthebasicmathoperations.
Inthecalculator,somekeysaredefinedasspecificfunctionforthemathoperations(refertoTable7‐2).