User Manual

 
 ________________________________________________________________________________________________________________
25
8.2 Measuring
IntheBasicMode(asFigure8.1),ifmeasurementisactive,youcanpressswitchkeys(,, , , )topop
up relevant measurement items list. If source is active, you can press a switch key twice to pop up relevant
measurementitemslists.Youcanselectameasurementfromthelist.Tochange
anyofmeasurementparameters,the
measurement must be in active state. If the measurement is inactive, press the navigation keysUp/Downuntil
measurementdisplayareaisfocused.
8.2.1 Millivolts Measurement
Proceedasfollowstomeasuremillivolts:
1. Figure8.2showsthemillivoltsmeasurementconnections.
2. If measurement is active, press once, otherwise press
twice.
3.
Press the navigation keys Up/Downto select the first item
from the pop‐up list, and then pressEnter or theDone to
changethemeasurement.
4. To improve measurement precision, you can shortthe
millivoltsinput,andthenpressZerotoclearthemeasured
value.
8.2.2 Volts Measurement
Proceedasfollowstomeasure
volts:
1. Figure8.2showsthevoltsmeasurementconnections.
Figure8.2Millivolts orVoltsMeasurement