Product data

APCI-7xxx-3 Figures and Tables
5 INSTALLATION OF THE BOARD
The interrupt lines and base address of the board are allocated by the BIOS of the
PC system through software. No setting is then required before inserting the
board.
i
IMPORTANT!
Do observe the safety precautions (yellow leaflet)!
5.1 Opening the PC
♦ Switch off your PC and all the units connected to the PC
♦ Pull the PC mains plug from the socket.
♦ Open your PC as described in the manual of the PC manufacturer.
5.2 Selecting a free slot
♦ Insert the board in a free PCI-5 V or 3.3 V slot (32/64-bit).
Fig. 5-1: Slot types
♦ Remove the back cover of the selected slot according to the instructions of
the PC manufacturer.
Keep the back cover. You will need it if you remove the board
♦ Discharge yourself from electrostatic charges.
♦ Take the board out of its protective pack.
24