Product data

APCI-7xxx-3 Figures and Tables
4 TECHNICAL DATA
4.1 Electromagnetic compatibility (EMC)
The board APCI-7xxx-3 complies with the European EMC directive. The tests
were carried out by a certified EMC laboratory in accordance with the norm from
the EN 61326 series (IEC 61326). The limit values as set out by the European
EMC directive for an industrial environment are complied with.
The respective EMC test report is available on request.
4.2 Physical set-up of the board
The boards APCI-7500-3, APCI-4720-3 and APCI-7300-3 are assembled on a
4-layer printed circuit card.
Dimensions:
151 mm
99 mm
Weight: ...................................................... approx. 120 g
Installation in: ........................................... 32/64-bit PCI slot
(5 V and 3.3 V)
Connection to the peripheral:
APCI-7300-3: ........................................... 9-pin SUB-D male connector
APCI-7420-3: ........................................... 2 x 9-pin male SUD-D male connector
APCI-7500-3: ........................................... 37-pin SUB-D male connector
APCI-7500-3/4C: ..................................... 4 x 9-pin SUB-D male connector with 2
nd
slot
Connection cables for the APCI-7500-3
1
:
ST074:
37-pin SUB-D female connector to 4 x 25-pin SUB-D male connector
ST075:
37-pin SUB-D female connector to 4 x 9-pin SUB-D male connector
WARNING!
The supply lines must be installed safely against mechanical
loads.
1 Not included in the standard delivery.
13