Datasheet

D-Sub
male
connector
37x
D-Sub
female
connector
ST010 / ST011
APCI-1500
APCI-1500
D-Sub
female connector
D-Sub
male connector
ST021
10x
10x
37x
37x
10x
10x
37x
37x
D-Sub
male
connector
37x
PX901-DG
PX8500-G
PX8500-G
D-Sub
X5
X5
X4
X4
male
connector
ST022
Example 1
Connection of the inputs and outputs
through screw terminal panels
PX901-DG
or PX9000
Example 2
- Connection of the inputs
through screw terminal panel PX901-DG
- Connection of the outputs
through relay output board
PX8500-G cascaded in 16 relays
Cascading
through cable ST8500
37-pin
D-Sub male
connector
16 digital
outputs
16
digital
inputs
PCI bus
Optical
isolation
PCI
interface
- Control
logic
- Watchdog
- IRQ inputs
FPGA
Pro-
tective
circuit
and
filters
16
digital
inputs
16
digital
outputs
Opto-couplers
Opto-couplers
Specifications
Ordering information
APCI-1500 / APCI-1500-12V
Digital I/O board, optically isolated, 32 digital inputs and outputs, 24 V / 12 V. Incl. technical description, software drivers and monitoring program.
Digital inputs
Number of inputs: 16 (common ground acc. to IEC 1131-2)
Including interruptible inputs: 14, IRQ line selected through BIOS
Optical isolation: Through opto-couplers, 1000 V from PC to peripheral
Compare logic: AND and OR mode; OR priority
24 V version (APCI-1500)
Nominal voltage: 24 V
Input current at 24 V: 6 mA typ.
Logic input levels: U nominal: 24 V
UH max.: 30 V/current 9 mA typ.
UH min.: 19 V/current 2 mA typ.
UL max.: 14 V/current 0.7 mA typ.
UL min.: 0 V/current 0 mA typ.
Signal delay: 70 µs (at nominal voltage)
Maximum input frequency: 5 kHz (at nominal voltage)
12 V version (APCI-1500-12V)
Nominal voltage: 12 V
Input current at 12 V: 4.2 mA typ.
Logic input levels: U nominal: 12 V
UH max.: 16 V/current 6.3 mA typ.
UH min.: 9 V/current 2.7 mA typ.
UL max.: 6 V/current 1.2 mA typ.
UL min.: 0 V/current 0 mA typ.
Signal delay: 70 µs (at nominal voltage)
Maximum input frequency: 5 kHz (at nominal voltage)
Digital outputs
Number of outputs: 16, optically isolated up to 1000 V
through opto-couplers
Output type: High-side (load to ground) acc. to IEC 1131-2
Nominal voltage: 24 V / 12 V (APCI-1500-12V)
Supply voltage: 10 V to 36 V, min. 5 V (via front connector)
Max. current for 16 outputs: 3 A typ.
Output current/output: 500 mA max.
Short-circuit current/output shutdown at 24 V, R
load
< 0.1 Ω: 1.5 A
RDS ON resistance: 0.4 Ω max.
Switch-on time: l out=0.5 A, load = resistance: 100 µs
Switch-off time: l out=0.5 A, load = resistance: 60 µs
Overtemperature (shutdown): 170 °C (output driver)
Temperature hysteresis: 20 °C (output driver)
Safety
Shutdown logic: When the ext. 24 V voltage drops below 5 V:
The outputs are switched off.
Diagnostics: Status bit or interrupt to the PC
Timer: 3
Watchdog: Timer-programmable, 10 µs to 37 s
EMC – Electromagnetic compatibility
The product complies with the European EMC directive. The tests were carried out by
a certied EMC laboratory in accordance with the norm from the EN 61326 series (IEC
61326). The limit values as set out by the European EMC directive for an industrial
environment are complied with. The respective EMC test report is available on request.
Physical and environmental conditions
Dimensions: 131 x 99 mm
System bus: PCI 32-bit 3.3/5 V acc. to specication 2.1 (PCISIG)
Space required: 1 PCI slot
Operating voltage: +5 V, ± 5 % from the PC
Current consumption: 400 mA typ. ± 10 %
Front connector: 37-pin D-Sub male connector
Temperature range: 0 to 60 °C (with forced cooling)
Versions
APCI-1500: Digital I/O board, opt. isolated, 32 dig. I/O,
24 V inputs, outputs 10 to 36 V
APCI-1500-12V: Digital I/O board, opt. isolated, 32 dig. I/O,
12 V inputs, outputs 10 to 36 V
Accessories
PX901-D: Screw terminal panel, LED status display
PX901-DG: Screw terminal panel, LED status display, for DIN rail
PX9000: 3-row screw terminal panel for DIN rail, LED status display
PX8500-G: Relay output board for DIN rail, cascadable
ST010: Standard round cable, shielded, twisted pairs, 2 m
ST011: Standard round cable, shielded, twisted pairs, 5 m
ST010-S: Same as ST010, for high currents (separate 24 V supply)
ST021: Round cable between APCI-1500 and PX8500-G, shielded,
twisted pairs, 2 m
ST022: Cable between PX8500-G and PX901-DG, shielded, 2 m
ST8500:
Ribbon cable for cascading two PX 8500
Pin assignment – 37-pin D-Sub male connector
ADDI-DATA connection
Simplified block diagram
159
Phone: [phone] info
@
addi-data.com
Fax: [phone] www.addi-data.com
PCI boards, digital I/O – APCI-1500 / APCI-1500-12V