User manual

welcome contents
installation
operation
rter
inormation
15
To set the cable length
a From standby, press . The Caps Lock and Scroll
Lock indicators will flash.
b Use the keypad to enter the cable length in metres.
c Press to save the value and return to standby.
Alternatively, press to discard any change and return to standby.
Note: You can also increase or decrease the cable length setting from the
standby level (and view the resulting change in screen image quality) using
and respectively. If necessary, press to return to a neutral setting. Such
adjustments to the cable length setting are saved automatically.
To adjust video gain
a From standby, use and to decrease or increase the gain level. If
necessary, press to return to a neutral setting. Gain adjustments are
saved automatically.
continued
Num
Lock
Caps
Lock
Scroll
Lock
Num
Lock
Caps
Lock
Scroll
Lock
Video compensation (continued)
Once you have entered video compensation mode, you can choose which
adjustments to make. Generally you should set the cable type and cable length
options first. Then, if necessary, use the video gain and colour skew adjustments
to fine tune the remote video image.
To set the cable type
a From standby, press . The Num Lock and Caps
Lock indicators will flash.
b Type the number that corresponds to the category
of link cable used:
• Press for Cat 5
• Press for Cat 5e
• Press for Cat 6
• Press for Cat 7
• Press for Cat 7a
c Press to save the value and return to standby. Alternatively, press
to discard any change and return to standby.