User manual
welcome contents
installation
operation
rter
inormation
9
Connections at the remote module
1 Place the remote module adjacent to the user location.
To video
display
2 Attach the leads of up to four
USB devices (two of which are
usually a keyboard and mouse)
to the sockets located adjacent
to the video output connector.
3 Attach the lead from the
video display to the video
out socket on the remote
module.
[MS2 variant only] Optionally
attach the lead from a second
video display to the upper
video out socket on the MS2
remote module.
To primary
video display
To secondary
video display
[MS2 variant only] When connecting four USB devices to
the unit, ensure that their total power requirements do
not exceed 1700mA (1.7A). The USB standard states
a maximum allowable current draw of 500mA
(0.5A) per device, although most devices
remain well below this limit - USB
keyboards and mice typically
require 100mA. Each X-USBPRO
contains a self-resetting fuse that
will prevent damage by shutting
down the unit if the total power
draw becomes excessive.