Specifications

 



 









Pan-head

screw

Countersunk

screws x 2

Rack

securing

plate

Stage B - Mounting a module – desk or rack

The Gold Extender modules can be situated on a desk (or floor) or

alternatively, for larger installations, mounted within optional rack

mount chassis units.

Desk mount

Apply the supplied self-adhesive rubber

feet to the underside of the module(s).

Rack mount

Note: The module switches are not accessible once it is inserted into

the rack, therefore, check all settings before insertion.

1 Place the rack securing plate (available as a separate kit) onto the

front of the module and secure it with the two countersunk screws.

2 Orient the module on its side so that its labelled face is the correct

way up and the securing plate is facing away from the rack.

3 Slide the module into the required rack position. The rectangular

cut-out in the front upper lip of the rack allows the two screws on

the module’s upper edge to slide through.

4 The rack mount chassis has a series of holes in its floor that are

spaced to accommodate the two screws on the

module’s lower edge. Ensure that the screws

correctly locate into the two holes of the

chosen slot. The rack securing plate on the

module should now be flush with the front of

the rack mount chassis.

5 Use the third (pan-head) screw, in the top hole

of the rack securing plate to fasten the

module to the rack.