Specifications

5
 

 




REMOTE module switches
Note: When shipped, all switches are set in the OFF positions and this
will produce normal operation.
REMOTE module switches (continued)
REMOTE Switch 1
OFF: Normal operation.
ON: (Before power is applied) Places the REMOTE module into flash
upgrade mode so that the internal software can be changed.
Please see the ‘Flash upgrade’ section in the ‘Special
configuration’ chapter.
REMOTE Switches 2 and 3
Switches 2 and 3 determine which two keyboard keys (when pressed
in unison) are to be designated as ‘hotkeys’. Hotkeys signal to the
REMOTE module that the next key to be pressed is a special
configuration command for the module and is not to be passed to the
computer system.
2 OFF
3 OFF
Hotkeys = CTRL and SHIFT
2 OFF
3 ON
Hotkeys = ALT and SHIFT
2 ON
3 OFF
Hotkeys = CTRL and ALT
2 ON
3 ON
Hotkeys disabled
REMOTE Switch 4
OFF: Automatic video compensation mode. In this mode circuitry
within the REMOTE module will adjust the video compensation
settings automatically at power on to match the length of the
cable run (providing the twisted pair to both modules is
connected and both modules are switched on).
ON: Manual video compensation mode. Use this mode to bypass the
automatic compensation circuitry if manual adjustment is
required to improve the video quality. Automatic video
compensation disabled. Please see the ‘Video compensation’
section in the ‘Special configuration’ chapter.
Determines configuration
of hotkeys in conjunction
with switch 3
OFF: Automatic video
compensation mode
ON: Manual video
compensation mode
OFF: Normal operation
ON: Flash upgrade
Determines configuration
of hotkeys in conjunction
with switch 2
REMOTE