Specifications
18
Other products in the X-Series range
The following related X-Series items are available:
• Dual video transmitter (part code: X-DVT)
Allows one system to be controlled from two locations or permits
a second video channel to be sent to a remote location. Used in
conjunction with two standard receiver/remote modules.
• Skew compensator (part code: X-SC)
Removes colour split in video signals caused by certain Cat 5e and
6 cables. Required only in certain installations with long cable
lengths and high video resolutions.
• Rack mount chassis (part code: RMK-CHASSIS)
This 19” chassis allows multiple X-Series modules to be neatly
arranged within a standard cabinet. Securing plates and screws are
supplied separately for each X-Series module for use with the rack
mount chassis.
• Power distribution module (part code: X-PDM4)
Provides power for up to four X-Series modules to reduce mains
power socket requirements.
• Rack mount securing plates
• for Gold Extender remote module (part code: X-RMK-KVMAS/R)
• for Gold Extender local module (part code: X-RMK-KVMAS/T)
• for Dual Video Transmitter (part code: X-RMK-DVT)
• for Skew compensator (part code: X-RMK-SC)
• single slot blanking plate (part code: X-RMK-BLANK)
• quad slot blanking plate (part code: X-RMK-BLANK4)
Safety information
• For use in dry, oil free indoor environments only.
• Warning - live parts contained within power adapter.
• No user serviceable parts within power adapter - do not dismantle.
• Plug the power adapter into a socket outlet close to the module
that it is powering.
• Replace the power adapter with a manufacturer approved type
only.
• Do not use the power adapter if the power adapter case becomes
damaged, cracked or broken or if you suspect that it is not
operating properly.
• If you use a power extension cord with the module, make sure the
total ampere rating of the devices plugged into the extension cord
does not exceed the cord’s ampere rating. Also, make sure that
the total ampere rating of all the devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
• Do not attempt to service the modules yourself.
Warranty
Adder Technology Ltd warrants that this product shall be free from
defects in workmanship and materials for a period of two years from
the date of original purchase. If the product should fail to operate
correctly in normal use during the warranty period, Adder will replace
or repair it free of charge. No liability can be accepted for damage due
to misuse or circumstances outside Adder’s control. Also Adder will
not be responsible for any loss, damage or injury arising directly or
indirectly from the use of this product. Adder’s total liability under the
terms of this warranty shall in all circumstances be limited to the
replacement value of this product.
If any difficulty is experienced in the installation or use of this product
that you are unable to resolve, please contact your supplier.