User guide


F




 

2
MK
Welcome
Thank you for choosing the AdderLink X-Series Dual Video Transmitter. Used in
conjunction with two remote receivers, this compact unit allows you to control
(or monitor) one computer from two separate locations. The long distance links
are made via Category 5 or higher cabling and each of the two spurs can be up
to 200m in length. The Dual Video Transmitter can be used in two ways:
‘One-in, two-out’ mode
Allows one computer to be accessed by two separate keyboard, video and
mouse sets. Control of the system is arbitrated on a ‘first come, first served’
basis, with control being relinquished two seconds after the last keyboard or
mouse action.
Supplied items
‘Two-in, two-out’ mode
When the computer has a second video controller, this mode allows a keyboard,
video and mouse set to form a remote control connection, while the secondary
video channel is transmitted to a second video monitor in the same (or an
alternative) location.
Optional connection to
power adapter (required
when no keyboard
connection will be made
Connection from
the secondary video
controller within
the computer (if
used)
Connection from
the primary video
controller within
the computer
Socket for Y-cable to
which connections
from the keyboard and
mouse ports of the
computer are attached
Twisted pair
connection to
primary (UTP 1) and
secondary (UTP 2)
remote receivers
Switch bank to
determine certain
modes and functions
Expansion connector
for future use and
optional power input
AdderLink X-Series Dual Video
Transmitter module
Power
and signal
activity
indicator
Self-adhesive
rubber feet
Y-cable
2 x PS/2 style
(keyboard and
mouse) cables
2 x video cables
Power supply plus
mains cable